Product Description
Vertical HRF512-05N Nitrogen Hot Air BBO Furnace with Fast Heating and Cooling Speed
Applications
Ideal for powder materials, magnetic materials, ceramics, glass, metals, plastics, and post-3D printing processes including drying, curing, debinding, tempering, annealing, aging, preheating, and age hardening.
Technical Specifications
Rated Temperature: 500ºC
Max Temperature: 750ºC
Effective Dimensions: 800 × 800 × 800mm (W×H×D)
Heating Method: Stainless Steel Heater
Process Atmosphere: Nitrogen
Temperature Control Stability: ±1ºC with PID parameter self-tuning
Temperature Uniformity: Better than ±5ºC (tested at 400ºC for 1 hour)
Thermocouple: Type K
Max Heating Power: 24kW
Heating Rate: ≤5°C/min (operable at 1°C/min)
Insulation Power: ≤ 12kW
Surface Temperature Rise: ≤ 35ºC
Weight: Approximately 1200kg
Furnace Dimensions: 1500 × 1930 × 2000mm (W×H×D)
Appearance Color: Light gray
Delivery List
| Item | Note | QTY |
| Basic Compositions |
| Dryer | | 1 PC |
| Certificates of Inspection | Dryer and major purchased components | 1 Set |
| Technical Documents | Manual instructions, technical documents of major purchased components | 1 Set |
| Key Parts |
| Stainless Steel Heater | | 1 Set |
| Temperature Controller | | 1 Set |
| Oxygen analyzer | | 1 Set |
| Spares |
| SSR | | 1 PC |
| Stainless Steel Heater | | 1 Set |
| Seal gasket | | 2 Set |
Facility Requirements
Environmental Conditions: Temperature 0-40ºC, humidity ≤80% RH, no corrosive gas, no strong airflow disturbance
Process Air Conditions: 99.999% purity nitrogen, pressure 0.2-0.4Mpa, gas consumption 10m³/h
Ventilation System: Non-contact access to user pumping system, capacity >15m³/h
Ground Requirements: Level, no obvious vibration, bearing capacity >300Kg/m²
Power Conditions: Capacity >32kVA, 3 phases 5 lines, voltage 220/380V, frequency 50Hz
Installation Site: 2000×3000×3000mm (W×H×D), area >6m²
